Bullet editing

• Lifetime (number of frames)
  This is the amount of time, in frames, before the barrage ends
• Target
  Specifies the direction and offset angle of the target.
  • Britain's direction will be 0 degrees
  • Direction of travel
    The direction the character is moving will be 0 degrees
  • Fixed direction
    Bottom of the screen will be 0 degrees
  • Your direction
    The direction your character is facing will be 0 degrees
• Keep the angle of the first bullet
  When aiming at a moving target, the angle of the first bullet and thereafter changes and the angle of the first bullet is maintained. It will If you check, the angle of the first bullet is applied to all subsequent bullets

• Minimum and maximum values
  As a barrage parameter, some of the values that are set have a certain range There are three parameters (e.g. injection position and direction). When specifying these parameters, the minimum value, the maximum value and the calculation method are specified
  • Random
    Randomly choose a value from minimum to maximum
  • Linear
    It gradually varies from the minimum value immediately after the start to the maximum value. The maximum value is reached in the same amount of time as the lifetime
  • Sine wave
    Varies with the same period as the sine wave (sine wave). The initial value is the median of the minimum and maximum value
• Offset value for injection position XY
  Offset value for injection position
• Injection angle
  Offset value of the injection angle
• Injection speed
  Injection speed in absolute value
• Injection Interval
  Injection and Injection Interval, per frame
• Ejection rate
  Specifies the number of bullets to be ejected in one shot

• XY
  Ejection position is changed with each shot
• Angle
  Ejection angle for each shot
• Interval
  Varying the interval between each shot